Automotive paint rooms need to be completely dust-free. The smallest particles can stick to the bodywork and manufacturers look to exclude unnecessary materials that can release dust, fibres, and other particles, in these locations. Belts are used in many paint rooms on installations that move the car bodies into and out of the spray booths. This process is performed before mounting the car assembly with tires. A Volta fabrication was selected to carry bodies with no risk of marking the frames or of shedding fibres on contact points of the heavy workpieces.
Preserving Quality in the Gummy Bear Project with FEDR-SD ITO 50 V1
The maintenance manager says: “Although a Volta belt is more expensive than the plied belt, at the end it turns out cheaper – because the cheap turned out to be expensive for us!”
